Best Unlacquered Brass Faucets in 2026, by Style and Budget
There is no single best unlacquered brass faucet. The right one depends on your sink, your counter, how you cook or wash up, and what you want to spend. This guide groups our own faucets by style and starting price, then explains what to check on any unlacquered brass faucet before you buy, from any brand.
A quick note on fairness: Brasslik makes every faucet named below, so this is not an independent ranking. What we can do is be specific. Every measurement and price here comes from the product listings as of November 2026, and every faucet is solid, lead-free brass with free FedEx shipping in the U.S. and Canada, a 5-year warranty and 90-day returns.
What makes an unlacquered brass faucet worth buying
Before comparing styles, it helps to know what separates a faucet that ages beautifully from one that disappoints. If you are new to the finish, start with Unlacquered Brass: The Complete Guide. The short version:
- Solid brass, not plated. "Brass finish" often means a thin coating over zinc or steel. When that coating wears through, the metal underneath shows. Solid brass has no layer to wear off, so it only gets deeper in tone. Ask the seller directly what the body is made of.
- Lead-free. In the U.S., faucets for drinking water must meet the federal lead-free standard (no more than 0.25% lead, weighted across the surfaces that touch water). Look for the words "lead-free" on the listing.
- Ceramic disc cartridges. These are the valves inside the handles. Ceramic discs resist wear and dripping far better than old rubber washers.
- No lacquer at all. A truly unlacquered faucet will start to darken within weeks of use. A lacquered one stays bright until the coating chips, and then ages unevenly. If you want the living finish, make sure there is no clear coat.
- Flow rate that fits your state. Federal rules cap kitchen and bathroom faucets at 2.2 gallons per minute, and some states, including California, set lower limits. Our kitchen faucets are typically 1.8 GPM and our bathroom faucets 1.2 GPM.
Best unlacquered brass bridge faucets
A bridge faucet has two handles joined to the spout by a horizontal "bridge" above the deck. It is the classic English kitchen look and the style most people picture when they think of an unlacquered brass kitchen. Most bridge faucets need two holes 8 inches apart (center to center), so check your sink or counter first.
Best overall bridge faucet: Dublin Bridge Faucet (from $590)
The Unlacquered Brass Dublin Bridge Faucet is one of our best sellers, largely thanks to its proportions. It stands 17.5 inches tall with a 10-inch spout reach, so water lands well into the middle of a large farmhouse or apron sink instead of near the back edge. It mounts on an 8-inch spread and runs at 1.8 GPM. It is offered with a filter tap, or with a side sprayer and filter tap.
Best for a classic look on a tighter budget: King Size Bridge Faucet (from $472.21)
The King Size bridge faucet has the same 17.5-inch height as the Dublin but an 8-inch reach and simple cross handles. If your sink is a standard depth, the shorter reach is not a compromise; it keeps the spout centered over a smaller bowl.
Best for a working kitchen: Bridge Faucet with Side Sprayer and Drinking Water Tap (from $472)
If you rinse a lot of produce or fill large pots, a side sprayer makes a bridge faucet far more practical. This model adds a dedicated drinking water tap as well, which is useful if you run filtered water to the sink. It offers four handle styles and a maximum flow of 1.5 GPM at 60 PSI. The sprayer and the drinking tap each need their own hole, so count the holes in your sink or counter before ordering.
Best ornate style: Victorian Bridge Faucet (from $540.21)
For a period kitchen, the Victorian bridge faucet has a Victorian-inspired design. It is 17 inches tall with an 8-inch spout projection and 8-inch centers. A version with a side sprayer and drinking tap is also available.
Best unlacquered brass pull-down faucets
A pull-down faucet puts the sprayer in the spout itself, so you only need one hole. It suits modern and transitional kitchens, and anyone who wants the brass without the extra holes of a bridge setup.
Best single-hole faucet: Brewster Pull Down Faucet ($400)
The Brewster is 17 inches tall with an 8.6-inch reach, a ceramic disc cartridge and a 1.8 GPM flow rate. Optional add-ons include a cold water tap, an air gap cover and a sink strainer in matching brass, which helps everything on the sink age at the same rate.
Our plain Unlacquered Brass Pull Down Kitchen Faucet is the same price ($400) with a slightly shorter 8-inch reach, if you prefer a simpler silhouette. You can compare every option in our unlacquered brass kitchen faucet collection.
Best unlacquered brass bathroom faucets
Bathroom faucets get touched less and splashed more than kitchen ones, so they often develop a softer, more even patina. The key decision is how many holes your vanity has.
Best widespread faucet: Belmont Widespread Bathroom Faucet (from $320)
A widespread faucet has a separate spout and two handles, usually across an 8-inch spread. The Belmont Widespread Bathroom Faucet has a curved spout, cross handles, a 6-inch reach and an 8-inch height, with a 1.2 GPM flow rate. It is one of our best-selling bathroom faucets.
Best simple 3-hole faucet: Three Holes Bath Faucet ($320)
Also a three-hole design, this faucet is 8 inches tall with a 5.5-inch reach and two handles. The slightly shorter reach suits smaller undermount basins where a long spout would splash past the drain.
Best for vessel sinks: Deeb Basin Faucet ($398.99)
A vessel sink sits on top of the counter, so the faucet needs extra height. The Deeb is 13 inches tall overall, with the spout outlet 8 inches above its base and a 7.5-inch reach. Check the height of your vessel bowl against these numbers before ordering.
Best unlacquered brass wall-mount faucets
Wall-mount faucets keep the counter clear and look striking above a vessel sink or a deep farmhouse sink. They also need planning: the valve sits inside the wall, so your plumber has to rough it in before tile goes up.
Best wall-mount bathroom faucet: Da Frico Style Wall Mounted Faucet ($381)
This two-handle faucet has an 8-inch reach, 6-inch center-to-center spacing and a 1.2 GPM flow rate, with adapters included for U.S. plumbing.
Best budget wall-mount: Da Frico Wall Mounted Faucet 02 ($302.40)
The lowest-priced faucet in this guide, with the same 8-inch reach and 1.2 GPM flow and a 5.9-inch spread. Both Da Frico models are best sellers and suit vessel and drop-in sinks.
Best unlacquered brass pot filler
If you are planning a brass kitchen, a pot filler over the range ties the look together. The San Diego Brass Pot Filler ($399.99) mounts on the wall through a single hole, has dual-handle control and delivers 4.6 GPM at 60 PSI, which is much faster than a sink faucet and the whole point of a pot filler.
How to choose between them
Work through these questions in order and the list narrows quickly:
- How many holes do you have? One hole points to a pull-down. Two holes 8 inches apart suit a bridge faucet. Three holes in a row suit a widespread faucet. Extra holes beside a bridge faucet can take a side sprayer or a drinking tap. No holes, or a new build, opens up wall-mount.
- How deep is your sink? Large farmhouse sinks need a longer reach, like the Dublin's 10 inches. Standard sinks are fine with 8 inches.
- How do you use the sink? If you wash big pots or rinse produce daily, choose a model with a sprayer.
- What else will be brass? Matching drains, soap dispensers and strainers in unlacquered brass age together with the faucet, so the whole sink area looks consistent.
- What is your budget? In this guide, wall-mount bathroom faucets start around $300, bathroom faucets around $320, pull-downs at $400 and bridge faucets from about $472.
What to expect after it is installed
An unlacquered brass faucet arrives bright and starts to warm up within the first few weeks. The handles and the spout tip darken first, because they are touched and wet most often. Hard water will leave spots, which blend into the patina over time or wipe away with a soft cloth.
If you love the aged look, rinse and dry the faucet now and then and let it go. If you prefer it bright, polish it with a brass cleaner every few months. Because there is no lacquer, nothing peels, and you can switch between the two whenever you like.
Frequently asked questions
Is an unlacquered brass faucet a good idea for a busy kitchen?
Yes, if you like a finish that changes. Solid brass is durable, and the patina hides fingerprints and water marks better than polished chrome. If you want a faucet that always looks exactly as it did on day one, a lacquered or PVD finish is a better match.
Do I need a plumber to install these faucets?
Deck-mounted faucets connect to standard U.S. supply lines, and many homeowners install them themselves. Wall-mount faucets and pot fillers need an in-wall valve, so a plumber is the safer choice.
Can I return a faucet if it does not suit my sink?
Yes. Every Brasslik faucet comes with 90-day returns and a 5-year warranty.
Ready to compare? Browse every piece in our unlacquered brass collection, or narrow it down with our unlacquered brass bathroom faucets.
See the finish in person, or ask us anything about unlacquered brass.
Shop unlacquered brass