How to Clean Unlacquered Brass (and When Not To)
Unlacquered brass has no clear coat, so the metal itself is what you touch, wash and look at every day. That is why it develops a patina, and it is also why cleaning it is a little different from cleaning chrome or a coated finish. The good news: everyday care takes less than a minute, and you decide how bright or how aged your brass looks.
This guide covers the routine clean, how to remove water spots and green marks, how to polish brass back to a shine, and the times when it is better to put the polish away. If you are new to the finish, our complete guide to unlacquered brass explains what it is and why it changes.
First, decide what look you want
Before you pick up a cloth, choose your goal, because it changes how you clean:
- Let it age. You wash the brass to remove grime and soap, but you never polish. The patina deepens to a warm, darker tone over time.
- Keep it bright. You wash it the same way, then polish every so often to bring back the golden color.
- Somewhere in between. You let the body of a faucet age but brighten the spout tip or handles now and then.
All three are correct. The only real mistake is mixing them by accident, for example polishing one handle and not the other, which leaves the fixture looking patchy.
How to clean unlacquered brass every day
For routine cleaning, keep it simple. This removes fingerprints, soap residue and kitchen grease without touching the patina.
- Wet a soft cloth or sponge with warm water and a drop of mild dish soap.
- Wipe the brass gently, paying attention to handles and the base, where soap and grime collect.
- Rinse with clean water.
- Dry it with a soft, dry cloth. This is the step that matters most. Water left to evaporate on brass is what causes most spots and uneven marks.
That is it. Do this once or twice a week on a kitchen faucet, or whenever it looks smudged. Drying a faucet after heavy use is the single best habit for an even patina.
What not to use
- Abrasive pads and scouring powders. Steel wool, green scrub pads and gritty cleansers leave fine scratches.
- Bleach and harsh bathroom sprays. Strong chemical cleaners can stain or discolor bare brass.
- Leaving any cleaner to sit. Whatever you use, rinse it off and dry the surface.
If you are wiping down a whole countertop with a spray cleaner, wipe the faucet with plain soapy water instead.
How to remove water spots
Water spots are mineral deposits left behind when water dries on the surface. They show up more in homes with hard water and on fixtures that stay wet, such as a kitchen faucet next to a busy sink.
For light spots, the everyday clean above, followed by a thorough dry, is usually enough. For stubborn spots, use a mild acid to loosen the minerals:
- Mix equal parts white vinegar and warm water.
- Dampen a soft cloth, wipe the spotted area and leave it for no more than a minute or two.
- Rinse well with clean water and dry completely.
Be aware that any acid, including vinegar and lemon juice, will also lighten the patina where you apply it. If you are letting your brass age, treat only the spot and expect that area to look slightly brighter for a while. It blends back in as the patina returns.
Our article on patina, water spots and what to expect explains why spots and darker areas appear in the first place.
How to remove green or dark marks
Brass is an alloy of copper and zinc. Where water sits for a long time, for example around the base of a faucet or in a shower, the copper in the metal can form small green or blue-green deposits. This is verdigris, and on a fixture it is a sign that water has been left standing.
To remove it, use the same diluted vinegar method, or the lemon and baking soda paste described below, on the affected area only. Rinse, dry and then make drying that spot part of your routine so it does not return.
Dark brown or nearly black areas on handles are normally not dirt. They are patina, formed faster where hands touch the metal most. You can leave them, or brighten them with polish if you prefer an even tone.
How to polish unlacquered brass back to a shine
Because Brasslik's brass fixtures are made from solid lead-free brass, not a thin brass plating over another metal, the color goes all the way through. You can polish them back to bright brass as many times as you like without wearing through to a different metal underneath.
Option 1: a commercial brass polish
A cream or liquid brass polish is the most predictable way to get a bright, even shine. Follow the manufacturer's instructions, test it on a small, hidden area first, use a soft cloth, and buff in the direction of the metal. Wash the fixture with mild soap and water afterwards to remove any residue, then dry it.
Option 2: lemon and baking soda
For a gentle homemade option:
- Mix the juice of half a lemon with about a teaspoon of baking soda to make a paste.
- Apply it with a soft cloth and rub gently.
- Leave it for a few minutes, not longer.
- Rinse thoroughly with warm water and dry with a clean cloth.
Whichever method you choose, polish the whole fixture, not one part of it, so the color stays even. Expect the bright finish to start warming again within weeks, more quickly on pieces that get wet and touched every day. That is the finish working as intended.

When not to clean (or polish) unlacquered brass
Sometimes the best care is to do less.
- When you love the aged look. A patina takes months of daily use to build. One polish removes it in minutes. If you like where your brass is heading, stick to soap, water and a dry cloth.
- When only part of a fixture has changed. Polishing a single handle or the end of a spout creates a bright patch that stands out more than the original mark. Either do the whole piece or leave it.
- When the piece is lacquered, plated or of unknown origin. Polish and acids strip a clear coat unevenly and can wear through plating. This guide is for solid, unlacquered brass. If you are not sure what you have, see our comparison of lacquered vs unlacquered brass first.
- While a new fixture is settling in. Some owners let a new faucet age for its first few months without polishing, then decide whether they prefer it bright or aged.
Cleaning unlacquered brass in showers and bathrooms
A shower is the most demanding place for a living finish: it is wet every day, warm and humid. Showerheads, valves and handles in unlacquered brass tend to age faster than a faucet in a dry powder room.
- Give shower fixtures a quick wipe with a dry cloth after use, especially the valve trim and handles.
- Use mild soap and water for weekly cleaning, not the tile and grout spray you use on the walls.
- For mineral build-up on a showerhead face, use the diluted vinegar method on the outside, then rinse and dry.
If you are still choosing fixtures, you can browse our unlacquered brass showers knowing exactly what the upkeep looks like.
A simple care schedule
- After heavy use: dry the fixture with a soft cloth.
- Weekly: wash with warm water and mild soap, rinse and dry.
- As needed: treat water spots or green marks with diluted vinegar, then rinse and dry.
- Only if you want shine: polish the whole fixture with brass polish or lemon and baking soda.
Frequently asked questions
Can I use dish soap on unlacquered brass?
Yes. A drop of mild dish soap in warm water is a good everyday cleaner. Rinse and dry afterwards.
Does cleaning remove the patina?
Washing with soap and water does not. Acids such as vinegar and lemon, and brass polish, will lighten or remove it where you apply them.
Is it a problem if I never polish my brass?
No. Some owners never polish at all. The brass simply keeps aging to a deeper tone, and that is a valid way to live with the finish.
Can I add a lacquer to stop it changing?
Unlacquered brass is chosen precisely because it changes. If you want a finish that stays the same, a coated finish will suit you better than adding a coat to bare brass at home.
Choosing brass you can care for easily
Cleaning is easier when the fixture is built well. Brasslik's unlacquered brass faucets, showers and accessories are made from solid lead-free brass, so you can wash them, let them age or polish them back to bright for as long as you own them. Browse the full range of unlacquered brass fixtures, or start with a kitchen piece such as the Dusty bridge faucet. Shipping by FedEx is free in the U.S. and Canada, every fixture comes with a 5-year warranty, and you have 90 days to return it.
See the finish in person, or ask us anything about unlacquered brass.
Shop unlacquered brass