Unlacquered Brass Bridge Faucet Buying Guide: Holes, Spread, Reach and Handles
A bridge faucet is the one fixture that makes a kitchen look like it has been there for a hundred years. This guide walks through what to measure, which hole layout you need, how to pick reach, height and handles, and what changes when the faucet is unlacquered brass, so you order the right one the first time.
What is a bridge faucet?
A bridge faucet has two separate valve bodies, one for hot and one for cold, that sit on the counter or sink deck. A horizontal pipe, the "bridge," connects them above the deck, and the spout rises from the middle of that bridge. Water mixes inside the bridge rather than inside a single faucet body, which is why the design reads as old-fashioned and mechanical in the best way.
Because the valves are exposed, every part you see is metal you will touch every day. That is where unlacquered brass earns its place: with no clear coat, the brass darkens and softens with use into a warm patina that a lacquered or plated finish never develops. If you are new to the finish, our complete guide to unlacquered brass explains how it ages and how to care for it.
Step 1: Count your holes and measure the spread
Before you look at styles, look under your sink and at your counter. A bridge faucet has to match the holes you already have, or the holes you plan to drill.
- 2-hole bridge. The classic layout: one hole for each valve. The spout is carried by the bridge, so nothing goes through the counter in the middle.
- 3-hole bridge. Two valve holes plus a third, usually for a side sprayer, a filtered water tap, or (on some pull-down designs) the hose.
- 4-hole setups. Two valves, a side sprayer and a separate drinking water or cold tap.
Next, measure the spread: the distance from the center of the left valve hole to the center of the right one. Measure center to center, not edge to edge. Most bridge faucets, including most of Brasslik's, use an 8-inch spread. If your counter or sink is already drilled at 6 inches, you need a model built for that, such as our 6-inch core bridge faucet, which is a 2-hole design that stands 15 inches tall.
Also check the hole diameter and the deck thickness. Each product lists the hole size it needs; for example, our Farmhouse Bridge calls for 1-3/8 inch holes. If you are replacing a faucet on a thick stone counter or a deep apron sink lip, confirm the shanks are long enough before you order, or ask us.
Step 2: Choose spout reach and height
Spout reach is the horizontal distance from the faucet's center to where the water comes out. Ideally the stream lands near the middle of the bowl, or close to the drain, so you are not splashing the back wall of the sink or rinsing against the front edge.
- A standard single bowl usually works well with about 8 inches of reach, which is what most of our bridge faucets have.
- Deeper or wider sinks, and faucets set far back on the deck, benefit from more reach. The Dusty bridge faucet has a 10-inch reach and stands 17.5 inches tall, with four handle styles.
- Small prep sinks and bar sinks need less. A long reach over a small bowl sends water past the drain.
Overall height matters for what is above the sink. A tall, high-arc spout, around 17 to 17.5 inches on our larger models, gives room for stockpots and deep sheet pans. But under a low window sill, a shelf, or a cabinet, measure the clearance first. Lower profiles, such as our 14-inch models, sit neatly under a window.
Step 3: Cross handles or levers?
Handles are where a bridge faucet gets its personality, and they also affect how it works day to day.
- Cross handles are the traditional English look. They are easy to grip and turn precisely, but you need to twist them, which can be awkward with wet or full hands.
- Lever handles are quicker to push on and off with a wrist or knuckle. They are a practical choice for busy cooks and for anyone who finds twisting difficult.
- Backsplash clearance. Whatever you choose, make sure the handle can turn its full travel without hitting the wall or a window frame. This is a common surprise when a faucet is installed close to the backsplash.
Many of our bridge faucets let you pick from four handle styles at checkout, so you can match the look of your cabinet hardware.
Step 4: Decide on a side sprayer, filter tap or pull-down
A classic bridge faucet has a fixed spout. Decide now how you want to rinse and how you want to drink, because both affect the hole count.
- Side sprayer. A separate hand spray on its own hose, mounted beside the faucet. It is the traditional way to rinse the bowl and large pans with a bridge faucet. Our 3-hole bridge faucet comes with a matching sprayer, has a 9-inch reach and an 8-inch spread, and can be ordered with a filter tap as well.
- Drinking water or cold tap. If you run an under-sink water filter, a small matching tap keeps filtered water separate from the main faucet. Several of our bridge faucets offer one as a bundle option.
- Pull-down bridge. If you want the bridge look with the convenience of a pull-down spray head, a pull-down bridge design puts the spray head in the spout itself. Ours uses a 3-hole installation.
Unlike a sprayer bought separately, a matching sprayer or tap in the same unlacquered brass will age at the same pace as the faucet, so the set stays consistent over the years.
Step 5: Check what the faucet is made of
With a bridge faucet, you can see and touch the valve bodies, so material matters more than on a faucet with a hidden body.
- Solid brass, not plated. A plated zinc or steel faucet can chip and show a different metal underneath. Solid brass is the same metal all the way through, and it is noticeably heavy in the hand.
- Lead-free brass. This is important for any faucet that delivers drinking water. Brasslik faucets are made from solid lead-free brass.
- Ceramic cartridges. Look for ceramic disc cartridges, which give a smooth, drip-free turn and hold up well to daily use.
- Standard connections. Brasslik bridge faucets are made for standard U.S. plumbing, so a plumber can connect them to typical supply lines without adapters.
What to expect from an unlacquered brass bridge faucet
An unlacquered bridge faucet arrives bright and golden. With daily use it starts to warm within weeks, and areas that are touched or splashed often, like the handles and the base of the spout, change first. Expect an uneven in-between stage with water spots before the finish settles into a soft, even tone. That variation is the finish working as intended, not a defect.
Day-to-day care is simple: wipe with a soft cloth and mild soap, then dry. Avoid abrasive pads and harsh cleaners. If you ever want the shine back, brass polish restores it, and the patina will begin again from there. If you prefer it to stay bright with no upkeep, a lacquered or PVD finish is a better match, and that is a perfectly reasonable choice.
Installation tips
- Dry-fit first. Before anything is tightened, set the faucet in place and check the spread, the handle swing against the backsplash, and the spout position over the bowl.
- Use a plumber if you are unsure. Bridge faucets have two supply connections plus any sprayer or filter line, so if that is new to you, a licensed plumber is worth the call.
- Protect the finish during install. Wrap wrench jaws with a cloth so they do not scratch the brass.
- Flush the lines. Run water for a minute before fitting the aerator to clear any debris from new supply lines.
Quick checklist before you order
- How many holes do I have, or plan to drill: 2, 3 or 4?
- What is the center-to-center spread: 8 inches or 6 inches?
- Is the hole size and deck thickness within the faucet's limits?
- Will the spout reach land near the middle of the bowl?
- Is there enough height under the window, shelf or cabinet?
- Can the handles turn fully without hitting the backsplash?
- Do I want a side sprayer, a filtered water tap, or both?
FAQ
Can a bridge faucet go on a single-hole sink?
Not without drilling. A bridge faucet needs at least two holes, one for each valve. If your sink or counter has only one hole, a single-hole or pull-down faucet is the simpler choice.
Is a bridge faucet harder to clean?
There are a few more surfaces than on a single-handle faucet, but a quick wipe and dry keeps it in good shape. With unlacquered brass, a little patina is part of the look, so you do not need to polish it.
Does unlacquered brass rust?
No. Brass does not rust. It oxidizes and darkens into a patina.
What comes with a Brasslik bridge faucet?
Each product page lists what is in the box and the options you can add. Every order ships free by FedEx within the U.S. and Canada. Our faucets carry a 5-year warranty and 90-day returns.
Find your bridge faucet
Once you know your holes, spread, reach and handle style, the choice gets much easier. Compare every bridge, pull-down and wall-mount model in our unlacquered brass kitchen faucets, or browse the full unlacquered brass collection, all in solid lead-free brass. If your measurements fall between two models, send us a photo of your sink and counter and we will help you choose.
See the finish in person, or ask us anything about unlacquered brass.
Shop unlacquered brass