Brass Care

How to Age Brass Fast: Safe Ways to Speed Up Patina

By Brasslik 7 min read
Unlacquered brass wall-mounted bathroom faucet showing natural patina

Unlacquered brass ages on its own. Leave it alone, use it every day, and the bright gold softens into a warm, darker patina. But not everyone wants to wait. Maybe you are matching new cabinet pulls to an older faucet, or you simply prefer the lived-in look from day one. This guide explains how to age brass faster, which methods are safe for which pieces, and when it is better to let time do the work.

If you are new to the finish, our complete guide to unlacquered brass explains what it is and why it changes in the first place.

Before you start: three rules

  • It only works on bare brass. Lacquered or coated brass is sealed, so nothing on this list will reach the metal. Brasslik's brass fixtures and hardware are unlacquered, so there is no coating to strip.
  • Treat the outside, never the waterway. Faucets, pot fillers and showers carry water you drink or wash with. Never soak a faucet, never pour anything into the spout, and keep chemicals away from cartridges, aerators and seals. Fast-aging methods are best for hardware such as knobs and pulls, ideally before you install them.
  • Test first. Every piece of brass reacts a little differently. Try your method on a hidden spot, or on a spare piece, before you treat something you can see every day.

Method 1: let use do it (the slowest, and the safest)

The simplest way to age brass is to stop polishing it. Air, water and the natural oils on your hands all darken the surface over time. A few habits help it along:

  • Skip the polish. Wash with mild soap and water when needed, but do not use brass polish, lemon or vinegar, which all brighten the metal again.
  • Handle it. The handles of a faucet and the pulls you open most darken first, because skin oils speed up the change.
  • Let humidity help. Brass in a bathroom or near a kitchen sink ages faster than brass in a dry room.

This is the only method we recommend for an installed faucet or shower. There is no fixed timeline: it depends on your water, your climate and how often the piece is touched. Our article on patina, water spots and what to expect explains why some areas change faster than others.

Unlacquered brass wall-mounted bathroom faucet showing natural patina

Method 2: the hard-boiled egg trick (warm brown tones)

Hard-boiled eggs release sulfur, and sulfur darkens brass. This is a gentle, well-known way to give cabinet knobs, pulls and other small hardware a soft brown, antique look without touching the metal with any liquid.

  1. Clean the brass with mild soap and water, rinse and dry it fully. Grease and fingerprints cause blotchy results.
  2. Hard-boil two or three eggs. While they are still warm, peel them and cut or crush them to release the smell.
  3. Put the eggs and the hardware in a container with a tight lid or a sealed bag. Keep the brass from touching the eggs.
  4. Check every hour or two. The color usually deepens over several hours, but the pace varies, so watch rather than time it.
  5. When you like the tone, take the pieces out, wipe them with a dry soft cloth and let them air out.

For a more lived-in result, rub the high points lightly with a soft cloth afterwards, so the edges stay a little brighter than the recesses, the way old hardware wears.

Method 3: vinegar and salt fumes (green and blue tones)

If you want the green-blue tones of very old brass, vinegar and salt create them. Brass contains copper, and acid plus salt produce verdigris, a blue-green deposit in the same family of colors you see on old copper roofs. Because this is a stronger effect, use it only on decorative hardware, not on fixtures that touch water.

  1. Clean and dry the brass as above.
  2. Pour a little white vinegar into the bottom of a plastic container and stir in a spoonful of table salt.
  3. Set the hardware on a small raised stand, such as an upturned plastic lid, so it sits above the liquid, not in it. Close the container.
  4. Check regularly. When you see the color you want, remove the pieces and let them dry completely in open air before handling.

Verdigris sits on the surface and can rub off on hands and fabric at first. Once it is dry, a light wipe with a dry cloth removes the loose powder. On a fixture you use every day, verdigris is usually a sign that water has been left standing, which is why we suggest keeping this look for knobs, pulls and decorative pieces.

Method 4: ammonia fuming (deep, darker tones, with care)

Ammonia fumes darken brass quickly and give deeper, more uneven tones than the egg method. It is effective, but ammonia is a strong household chemical, so it is the one method on this list to approach carefully.

  • Work outdoors or in a very well ventilated space, and wear gloves and eye protection.
  • Never mix ammonia with bleach or with cleaners that contain bleach. The combination releases toxic gas.
  • As with vinegar, the brass hangs or sits above a small amount of ammonia in a closed container. It should never sit in the liquid.
  • Check often, because the change can be fast. Air the pieces out thoroughly afterwards.

If you are not comfortable handling ammonia, the egg method gets you most of the way there with far less risk.

What about store-bought antiquing solutions?

Hardware and craft stores sell brass darkening and antiquing solutions. They work fast and give strong color, but they are concentrated chemicals. If you use one, follow the label exactly, work on removed hardware only, and never apply it to a faucet, shower or anything that carries water. For most homes, one of the gentler methods above is enough.

Snyder round cabinet knob in unlacquered brass

Which method should you choose?

  • Installed faucet, pot filler or shower: Method 1 only. Stop polishing, keep washing with mild soap, and let use do the rest.
  • New knobs and pulls you want to match to older brass: Method 2, the egg trick, before installation.
  • Decorative pieces where you want green-blue character: Method 3, vinegar and salt fumes.
  • A deeper, darker look on hardware, if you are comfortable with the safety steps: Method 4, ammonia fuming.

Small hardware is the easiest place to start. Pieces such as the Beverly cabinet pull or the Snyder round knob come off with a screwdriver, so you can age them in a container on the counter and fit them when the tone is right.

Keeping the aged look

An artificial patina is only the starting point. Once the piece is in use, it keeps changing the same way natural patina does. To keep the look you created:

  • Clean with warm water and a drop of mild soap, then dry with a soft cloth.
  • Avoid brass polish, vinegar, lemon and other acids, which brighten the metal.
  • Avoid abrasive pads, which scratch through the surface layer and leave bright marks.

Changed your mind? You can go back

Patina is a surface change, not damage. Because Brasslik's brass fixtures and hardware are made from solid lead-free brass, not a thin plating over another metal, you can polish them back to bright brass if you decide you prefer the new look. Our guide on how to clean unlacquered brass walks through polishing step by step, including when it is better to leave the patina alone.

Frequently asked questions

How can I age brass naturally?

Stop polishing it, wash it only with mild soap and water, and use it. Handling, humidity and water all darken unlacquered brass over time.

Can I age a faucet that is already installed?

We recommend only the natural method for installed faucets, pot fillers and showers. Fuming methods need a closed container, and chemicals should never get near the parts that carry water.

Will lacquered brass age with these methods?

No. A clear coat seals the metal, so it will not react. Brasslik's brass fixtures and hardware are unlacquered, so they age without any preparation.

Is an aged finish harder to clean?

No. Day-to-day care is the same: mild soap, warm water and a dry cloth. The only difference is that you skip the polish.

Shop brass that ages beautifully

Brasslik's unlacquered brass faucets, showers and hardware are made from solid lead-free brass with no lacquer, so each piece is ready to age the moment it arrives, quickly or slowly, your choice. Browse the full range of unlacquered brass fixtures and hardware. Shipping by FedEx is free in the U.S. and Canada, every fixture comes with a 5-year warranty, and you have 90 days to return it.

Written by Brasslik

See the finish in person, or ask us anything about unlacquered brass.

Shop unlacquered brass

You may also like