Lacquered vs Unlacquered Brass: Which Should You Choose?
Two brass faucets can look identical on the day they arrive and completely different a year later. The reason is a thin, invisible layer of clear coating, or the lack of one. If you are choosing between lacquered and unlacquered brass for a kitchen, bathroom or shower, this guide walks through how each finish behaves in real life, what it costs you in care over the years, and a simple way to decide.
New to the finish? Start with our complete guide to unlacquered brass for the basics. This article focuses on one question: which of the two should you choose?
The short answer
- Choose unlacquered brass if you like natural materials that change with use, you are happy to let the finish darken and soften, and you want a surface you can always polish back to bright.
- Choose lacquered brass if you want the fixture to look the same every day for as long as the coating lasts, and you accept that once the coating wears, it is hard to repair at home.
Neither is "better." They suit different people. The rest of this article helps you work out which one is you.
What the lacquer actually does
Lacquered brass is solid brass (or, on cheaper fixtures, a brass-colored plating over another metal) that has been polished and then sealed with a clear coat. The coating keeps air and moisture away from the metal, so the surface stays bright and uniform.
Unlacquered brass skips that final step. The bare alloy of copper and zinc is exposed, so it reacts with air, water and the natural oils on your hands. That reaction is what creates patina: the warm, darker, softer tone you see on old ship fittings and in English country kitchens.
So the real difference is not the metal. It is whether the finish is frozen in place or allowed to evolve.

How each finish ages, year by year
Unlacquered brass
It arrives bright and golden. In a busy kitchen or a steamy bathroom, the shine usually starts to soften within the first few weeks. Handles darken first because they are touched most. Over the following months the tone deepens and evens out, and water spots blend in more as the patina builds. There is no fixed timeline: hard water, humidity, cleaning habits and how often the fixture is used all change the pace. Our guide to patina and water spots shows what the early stages look like.
Lacquered brass
It looks the same from month to month, which is the whole point. But clear coatings are not permanent. Heat, cleaning products, abrasion and constant hand contact eventually wear through, usually on the handles and the base of the spout first. When that happens, the exposed patches start to tarnish while the coated areas stay bright, which can leave a blotchy, uneven look. You cannot fix that by polishing, because polish damages the remaining lacquer.
Side-by-side comparison
| Unlacquered brass | Lacquered brass | |
|---|---|---|
| Day one | Bright, warm gold | Bright, warm gold |
| After regular use | Darkens and softens into a patina | Stays uniform while the coating holds |
| Fingerprints and water spots | Show more in the early months, then blend in | Wipe off the coating easily |
| When it wears | Nothing to wear off; it simply ages | Coating can chip or peel, leaving patchy tarnish |
| Can you polish it? | Yes, anytime, back to bright | No; polish damages the coating |
| Repair at home | Easy: polish or let it age | Hard: strip and re-coat, or replace |
| Character | Each piece ages a little differently | Consistent, factory-made look |
Care and maintenance: what you are signing up for
Living with unlacquered brass
Day to day, care is simple: wipe with a soft cloth, warm water and a little mild soap, then dry. Avoid abrasive pads and harsh chemical cleaners, which strip patina unevenly. That is it if you are happy to let the finish age.
If you prefer some shine, you choose how much. Some owners polish the whole fixture a few times a year. Many polish only the handles and let the body age, for a lived-in, two-tone look. Because there is no coating, there is no wrong answer and nothing to damage.
Living with lacquered brass
Day-to-day care is the same gentle wipe and dry. The difference is what you must not do: no polish, no abrasive cleaners and no harsh chemicals, because anything that scratches the coating opens the door to uneven tarnish. Once the lacquer fails, your options are to strip it completely, have it professionally re-lacquered, or live with the patchy look.
Which finish suits which room?
Kitchen faucets
The kitchen faucet is the most-touched fixture in the house, so it is where lacquer tends to wear first, and where unlacquered brass develops its patina fastest. A two-handle unlacquered brass kitchen faucet, such as a bridge style like the Seven bridge faucet, is the classic choice for English and French country kitchens for exactly this reason: it is meant to look used.
Bathroom faucets
Bathroom faucets get lighter use than kitchen faucets, so an unlacquered finish ages more slowly and evenly. Humidity speeds things up a little. If you want the bathroom to feel calm and consistent, either finish works; if you want it to feel collected over time, browse our unlacquered brass bathroom faucets.
Showers
Steam, heat and hard water are tough on clear coatings. Unlacquered brass simply ages faster in a shower, often into a deep, even tone.
Cabinet hardware
Knobs and pulls are touched constantly but never get wet, so unlacquered hardware ages in a very natural way: darker where hands rest, brighter on the edges. Matching your hardware to an unlacquered faucet means every piece in the room ages together.
Five questions to help you decide
- Do you like the way old brass looks? If a darkened, softened finish appeals to you, unlacquered is the natural choice.
- Will water spots and fingerprints bother you in the first months? If yes, plan to dry the fixture after use, or consider lacquered.
- Do you want control over the look? Unlacquered lets you polish it bright or let it age. Lacquered gives you one look until the coating wears.
- How long will you keep the fixture? Over many years, a finish with nothing to peel is easier to live with than a coating that eventually fails.
- Does the rest of the room use natural materials? Marble, oak, plaster, limewash and terracotta all pair especially well with a living finish.
Can you convert lacquered brass to unlacquered?
Often, yes, if the piece is solid brass. The lacquer can be removed with acetone or a dedicated lacquer remover, then the bare brass polished. Always follow the product's safety instructions, work in a ventilated space, and test a hidden area first. Results vary from piece to piece.
It will not work on brass-plated fixtures. If the "brass" is a thin plating over zinc or steel, stripping and polishing can wear through to the base metal. A magnet is a quick first check: brass is not magnetic, so if a magnet sticks firmly, the fixture is plated steel. Our complete guide (linked above) covers more ways to tell real brass from an imitation.
What to check before you buy either finish
- Solid brass or plated? Ask directly. Solid brass fixtures are noticeably heavy.
- Lead-free? In the United States, faucets that deliver drinking water must meet federal lead-free requirements. Ask the brand to confirm.
- Is it really unlacquered? Some fixtures sold as "brass" are lacquered or PVD-coated and will never patina. If you want a living finish, make sure the listing says unlacquered.
- Warranty and returns. A finish that changes is a big decision. A fair return window lets you see it in your own space.
The Brasslik approach
Brasslik makes only unlacquered brass fixtures (our range hoods and bathtubs are the exceptions, with other finishes available). Our faucets and showers are made from solid lead-free brass, with no clear coat to chip or peel. Shipping by FedEx is free in the U.S. and Canada, and every fixture comes with a 5-year warranty and 90-day returns, so you can live with the finish before you decide. Browse the full range of unlacquered brass fixtures, or visit our showroom in Martinez, California, to see how the finish looks in person.
Frequently asked questions
Is unlacquered brass harder to maintain than lacquered brass?
Not really. Both need only a gentle wipe and dry. The difference is that unlacquered brass changes color over time, and you can polish it whenever you like. Lacquered brass stays the same until the coating wears, and then it is harder to repair.
Does lacquered brass ever tarnish?
Not while the coating is intact. Once the lacquer is scratched or worn, the exposed metal tarnishes, often in patches.
Can I stop unlacquered brass from changing?
You can slow it by drying the fixture after use and polishing regularly, or by applying a wax. If you want no change at all, a coated finish will suit you better.
Can I mix lacquered and unlacquered brass in one room?
You can, but they will drift apart over time: the lacquered pieces stay bright while the unlacquered pieces darken. For a consistent look, choose one finish for every fixture in the room.
See the finish in person, or ask us anything about unlacquered brass.
Shop unlacquered brass